E.H. WACHS

POWER TROUBLESHOOTING ON TC-100 This article describes how to troubleshoot power issues on the TC-100. Refer to the following article first since the TC-1...

If you want to set the TC-100 controller to factory defaults, follow the instructions below. After a factory reset, the user will have to go through the Wi...

This article describes how to troubleshoot battery issues on the TC-100. If the battery is not getting detected by the TC-100 and shows an (x) in the ba...

Connecting R2 GPS (External) to TC-100 Pair External GPS NOTE: CLICK AND HOLD R2 POWER BUTTON FOR 2 SECONDS TO TURN IT ON Search for “Bluetooth ...

If you are getting SQL logic errors while trying to open the Vitals Mobile app on the TC-100 controller, then you might have bad data on the device.  Pl...

This addresses issue with Windows 10 End-of-Life Support. All TC-100 controllers with Windows 10 IoT Enterprise LTSC will be supported by Microsoft v...

Windows 11 is not supported on the TC-100 tablets. However, this should not be a concern as Windows 10 will still be supported by Microsoft on the TC-100 th...