P2
Loose connection on handle trigger. 1. Remove the two screws holding the cover in place on the backside of the trigger. Once screws are out push on the...
Mon, 21 Sep, 2020 at 1:15 PM
1. Remove the four screws holding the upper cover in place. 2. Pull apart or tap the side of the cover with a soft hammer till free. Flip cover and di...
Mon, 21 Sep, 2020 at 12:56 PM
How to change battery in your P2 housing Sign of a bad battery 1. Remove the four screws on top of housing plate 2. Separate top plate fro...
Mon, 21 Sep, 2020 at 12:53 PM
How to fix contrast 1. Remove the four screws from the P2 top housing plate 2. Separate top housing by tapping sides with soft hammer until free...
Thu, 9 Mar, 2023 at 1:44 PM
How to change your display to metric or U.S. 1. Press and hold reset count and zero torque at the same time until it changes to U.S. or metric. If...
Mon, 21 Sep, 2020 at 1:51 PM