Repairing locked up blower on a trav-l-vac 300
1. Remove hose clamp and remove silencer
2. Remove fittings from blower
3. Remove loose debris and lubricate
4. freeing up blower lobes
6: test run
Once blower is free and fittings are still removed
A: Remove any loose debris
B: spray lubricant on lobes
C: stand clear of blower outlet while starting machine to blow out any more debris. stay clear of blower outlet
7: assemble
A: put fittings, silencer, and hose clamp back on.
8: blower lubrication
A: open bleeder valve. located opposite side of silencer on T fitting
B: turn machine on
C: spray lube into hose that is attached to bleeder valve
D: shut machine down
E: close bleeder valve
to prevent rust and corrosion. do blower lubrication steps after every use